What did you and your MKV do today?

Started by ROH ECHT, June 12, 2011, 03:07:21 AM

Previous topic - Next topic

ROH ECHT

#10740
Just placed the order for a... https://torqbyte.com/products/torqbyte-pm3

K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

ROH ECHT

Went to Pacific WaterLands VW/Audi Show and Drags yesterday.
Was Fanboy'ing hard for this MK3 running 9.4's from 163 to 170mph...
https://www.facebook.com/edgar.gutierrez.5458/videos/10203700621351984/
K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

ROH ECHT

#10742
Ordered Black TSW center caps, to replace the machined look originals, for the Nurb's.
Will be going from this cap...


...to this for my center caps...when they arrive...

K04 PLAY...K04 turbo/S3 INJ. & FMIC/FORGE FMTC, TB hose, & WG actuator/GIAC's H.O. K04 & DSG TUNES/AWE DV/NEUSPEED P-FLO,TURBO OUTLET & TB pipe/AUTOTECH hpfp/BSH Eng.&Trans Mounts/H&R ARB's/Whiteline Performance springs & W.A.L.K./ECS stage-3 BBK/BILSTEIN B8's...ZOOM'DIS...GIAC K04 tune-2007 Volkswagen GTI: 12.823 @ 112.050 MPH__Voting for my Dragtimes link: http://www.dragtimes.com/Volkswagen-GTI-Timeslip-25700.html?r=1

neilw

#10743
I have a week off work I was hoping for better weather to try out my ChipEx kit and do some more machine polishing

Instead, I took the wheels off and cleaned up the inside of the rims and gave the calipers a good scrub. They'll need a repaint at some point as they're not in the best shape and have gone abit pink.

Found one of my CV boots leaking :sad1: and a screw in a tyre  :sad1:
Edition30 #0002 R-Tech Stage2

rolexmk5

Fitted a GTI bumper to my mk5 GTD today
even got the  fog lights to work by fitting the GTI plugs without cutting just swapping wires over
also covered up the red strip with blsck may paint silver to match car

pudding

Quote from: neilw on September 12, 2017, 07:57:57 PM
I have a week off work I was hoping for better weather to try out my ChipEx kit and do some more machine polishing

Instead, I took the wheels off and cleaned up the inside of the rims and gave the calipers a good scrub. They'll need a repaint at some point as they're not in the best shape and have gone abit pink.

Found one of my CV boots leaking :sad1: and a screw in a tyre  :sad1:

Let us know what the Chipex kit is like.  Been meaning to get one for mine, although I think I'd need a week off work to fill all my chips in  :grin:

Bummer on the CV boot.  Did both of mine last weekend, very straight forward job, although I would recommend the purchase of some very manly CV clip pliers.  Tons on Amazon.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

willni

Quote from: Pudding on September 13, 2017, 04:49:14 PM
Quote from: neilw on September 12, 2017, 07:57:57 PM
I have a week off work I was hoping for better weather to try out my ChipEx kit and do some more machine polishing

Instead, I took the wheels off and cleaned up the inside of the rims and gave the calipers a good scrub. They'll need a repaint at some point as they're not in the best shape and have gone abit pink.

Found one of my CV boots leaking :sad1: and a screw in a tyre  :sad1:

Let us know what the Chipex kit is like.  Been meaning to get one for mine, although I think I'd need a week off work to fill all my chips in  :grin:

Bummer on the CV boot.  Did both of mine last weekend, very straight forward job, although I would recommend the purchase of some very manly CV clip pliers.  Tons on Amazon.

In regard to the chipex kit I can save you the £30-£40 for it, here's the 2 versions of a home kit;

1.
Paint touch up pen from Volkswagen (£8)
Masking Tape
1200 grit sand paper
3000 grit disc
(optional) 6000 grit disc
Meguiars ultimate compound and your preferred polish regime (Doesn't have to be meguiars etc just a good strong cutting compound 6000 grit disc reduces the need for a heavy cut compound)

2.
Volkswagen paint touch up pen (£8)
Paint fine line pen £14 and link - http://www.carolescraftsuk.co.uk/product-p/490926.htm

this way there's no sanding so may suit more people it takes longer though as you're doing tiny dots into the stone chip so to avoid "overfilling" it with paint so you don't need to level it.

Video for the 2nd method too!
https://www.youtube.com/watch?v=Uz-zW-cLdUs

Hope this helps someone

jonk710

RNS510 installed with bluetooth VW kit.
R32
Mk2 16v - Jonk
A6 dog chariot
Rallye under construction

lukemk5gti

Quote from: Pudding on September 13, 2017, 04:49:14 PM
Quote from: neilw on September 12, 2017, 07:57:57 PM
I have a week off work I was hoping for better weather to try out my ChipEx kit and do some more machine polishing

Instead, I took the wheels off and cleaned up the inside of the rims and gave the calipers a good scrub. They'll need a repaint at some point as they're not in the best shape and have gone abit pink.

Found one of my CV boots leaking :sad1: and a screw in a tyre  :sad1:

Let us know what the Chipex kit is like.  Been meaning to get one for mine, although I think I'd need a week off work to fill all my chips in  :grin:

Bummer on the CV boot.  Did both of mine last weekend, very straight forward job, although I would recommend the purchase of some very manly CV clip pliers.  Tons on Amazon.

Second that.

I had a brand new set of pliers from eBay and they actually sheared mid use.

Such a pain, total headache then using a normal pliers.

pudding

Quote from: willni on September 13, 2017, 07:48:45 PM
Quote from: Pudding on September 13, 2017, 04:49:14 PM
Quote from: neilw on September 12, 2017, 07:57:57 PM
I have a week off work I was hoping for better weather to try out my ChipEx kit and do some more machine polishing

Instead, I took the wheels off and cleaned up the inside of the rims and gave the calipers a good scrub. They'll need a repaint at some point as they're not in the best shape and have gone abit pink.

Found one of my CV boots leaking :sad1: and a screw in a tyre  :sad1:

Let us know what the Chipex kit is like.  Been meaning to get one for mine, although I think I'd need a week off work to fill all my chips in  :grin:

Bummer on the CV boot.  Did both of mine last weekend, very straight forward job, although I would recommend the purchase of some very manly CV clip pliers.  Tons on Amazon.

In regard to the chipex kit I can save you the £30-£40 for it, here's the 2 versions of a home kit;

1.
Paint touch up pen from Volkswagen (£8)
Masking Tape
1200 grit sand paper
3000 grit disc
(optional) 6000 grit disc
Meguiars ultimate compound and your preferred polish regime (Doesn't have to be meguiars etc just a good strong cutting compound 6000 grit disc reduces the need for a heavy cut compound)

2.
Volkswagen paint touch up pen (£8)
Paint fine line pen £14 and link - http://www.carolescraftsuk.co.uk/product-p/490926.htm

this way there's no sanding so may suit more people it takes longer though as you're doing tiny dots into the stone chip so to avoid "overfilling" it with paint so you don't need to level it.

Video for the 2nd method too!
https://www.youtube.com/watch?v=Uz-zW-cLdUs

Hope this helps someone

You sir are a legend!  I watched that very video recently (epic bodywork skills!) and wondered where on earth to get one of those fine line paint tools from!  Going to order that now  :happy2:


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

pudding

Quote from: lukemk5gti on September 14, 2017, 08:42:11 AM
Quote from: Pudding on September 13, 2017, 04:49:14 PM
Quote from: neilw on September 12, 2017, 07:57:57 PM
I have a week off work I was hoping for better weather to try out my ChipEx kit and do some more machine polishing

Instead, I took the wheels off and cleaned up the inside of the rims and gave the calipers a good scrub. They'll need a repaint at some point as they're not in the best shape and have gone abit pink.

Found one of my CV boots leaking :sad1: and a screw in a tyre  :sad1:

Let us know what the Chipex kit is like.  Been meaning to get one for mine, although I think I'd need a week off work to fill all my chips in  :grin:

Bummer on the CV boot.  Did both of mine last weekend, very straight forward job, although I would recommend the purchase of some very manly CV clip pliers.  Tons on Amazon.

Second that.

I had a brand new set of pliers from eBay and they actually sheared mid use.

Such a pain, total headache then using a normal pliers.

I got some with 1/2" ratchet drive slots in each arm and it was still a ball ache and hard work crimping the darn things up fully tight.  I'd love to see what VW use in the factory for that job!!  Probably some robotic arm with mega pincers on it or something.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

NickGTi

Got new OEM shocks, droplinks, bumpstops and topmounts along with Eibach Pro Kit going on tomorrow, sadly I'm away with work until Wednesday so won't be able to drive it until then.

Currently running Sportline kit, but want to raise it slightly. Sportline kit will be for sale by the way!

pudding

Are they MK6 Monzas?  They look great.  Fancy bunging a bear one on the scales for us?!  :smiley:


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

willni

Quote from: Pudding on September 18, 2017, 03:40:44 PM
Are they MK6 Monzas?  They look great.  Fancy bunging a bear one on the scales for us?!  :smiley:

With all this weighing everything malarky you'd think your golf going to weightwatchers now [emoji23][emoji23]


Sent from my iPhone using Tapatalk

MIJ_JAGGER

Quote from: Pudding on September 18, 2017, 03:40:44 PM
Are they MK6 Monzas?  They look great.  Fancy bunging a bear one on the scales for us?!  :smiley:
They're MK5 BBS Monzas, had them refurbed with the black inserts and diamond face.
I've put them into the shed already Kev sorry matey.
They weigh 12ish kg if I remember correctly, same as the pescaras I think...